Server not detecting hard drives

[Proximity]

Hey DevBest,

I bought a new server and for some reason the server isn't detecting the harddrives I got four of them.

BIOS:

Inside the server:

 

[Macemore]

You probably have to set them up through the perc. When its booting there should be an option to configure it before it goes into bios. This is a raid server right? Send a pic of the front

 

[Ecko]

are they whirring?????

 

[Proximity]

Perc? Also when it boots it only has BIOS, Select boot option and network boot.

And I can't tell cause that fans.

 

[LeChris]

touch the motherfuckers and see if they prrrrr
just feel those fuckers up don't even ask for permission

that'll tell you if it's on or not

 

[Macemore]

nah man theres a raid card on that fucker, the hard drive slides into a pcb sata connection and that plugs into a Perc 5/i card for example. @Sky identify what model and manufacturer server you have. You need to configure the hard drives.
 
Take a video of it booting from when you press the button to bios mate.

 

[Proximity]

It's a Intel S5520UR mother board.

 

[Macemore]

It's a Intel S5520UR mother board.

is it a custom built server? Or a dell/hp server? I dont need specific parts.

 

[Proximity]

/Resolved
/Close Thread

 

[Ecko]

you're welcome

 

[0AK]

What are the specs of this server btw?

 

[Proximity]

What are the specs of this server btw?

Intel S5520UR Motherboard don't know the cpus yet..

24GB DRR3 ECC 1333MHz memory

Also the IOIO port is like IPMI correct?

 

[0AK]

Intel S5520UR Motherboard don't know the cpus yet..

24GB DRR3 ECC 1333MHz memory

Also the IOIO port is like IPMI correct?

Ahh, pretty nice. Well good luck with your server! Don't be running to much porn on it.

 

[Benden]

/Resolved
/Close Thread

Care to share how it was resolved incase a similar situation arises for others

 

[Proximity]

Care to share how it was resolved incase a similar situation arises for others

I had to setup the RAID controller.

And it is a DUAL x5560 cpu nothing to beast.
 
/Close thread please @Canadian